User Tools

Site Tools

Trace: • Mini-Me • Marty • DAVES DRAGON DICK • nutrient deficiency
cultivation:germination:sowing

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
cultivation:germination:sowing [2026/06/28 04:56] – added photo vaugithcultivation:germination:sowing [2026/06/28 15:52] (current) – resized image for formatting vaugith
Line 2: Line 2:
  
 You are ready to sow the seeds. Before you start, try to minimize potential contamination by washing your hands, sterilizing tools, and wiping down surfaces with a disinfectant. Let's get going! You are ready to sow the seeds. Before you start, try to minimize potential contamination by washing your hands, sterilizing tools, and wiping down surfaces with a disinfectant. Let's get going!
- 
-{{ :cultivation:germination:sterilization.webp?600&direct|Sterilizing multiple varieties of seeds at once with a hydrogen peroxide soak}} 
  
 == Step 1: Hydrogen peroxide soak (optional, but strongly recommended) == == Step 1: Hydrogen peroxide soak (optional, but strongly recommended) ==
 +
 +<WRAP right 400px>
 +{{ :cultivation:germination:sterilization.webp?400&direct| }}
 +//Sterilizing multiple varieties of seeds at once with a hydrogen peroxide soak//
 +</WRAP>
  
 Soaking the seeds in hydrogen peroxide before sowing will kill any contamination on the outer seed casing and has the added benefit of hydrating and oxygenating the seed, prepping it for germination! This step can speed up germination and boost low germination rates due to seed viability issues. Pour the seeds and a splash of hydrogen peroxide into a cup. If you are doing multiple varieties at once, consider using disposable cups and labeling them. If you want to do a short soak primarily for sterilization, one hour with straight 3% hydrogen peroxide is fine. For a longer soak that will also boost germination, I cut the hydrogen peroxide 1:1 with purified water for a 6 hour soak or even as dilute as 1:10 for a 12 hour soak. I've never burned my seeds with hydrogen peroxide, but I don't want to risk it. It's normal for the seeds to float or sink. When you are ready to collect the seeds from the hydrogen peroxide you can pour the mix through a filter such as a coffee filter or paper towel placed over a cup, then let the filter/paper towel dry. While they are drying you can move on to complete Step 2. Once dry you should be able to easily brush them off of the filter onto a folded sheet of paper, a paper plate, or into an envelope, whatever method you prefer. Soaking the seeds in hydrogen peroxide before sowing will kill any contamination on the outer seed casing and has the added benefit of hydrating and oxygenating the seed, prepping it for germination! This step can speed up germination and boost low germination rates due to seed viability issues. Pour the seeds and a splash of hydrogen peroxide into a cup. If you are doing multiple varieties at once, consider using disposable cups and labeling them. If you want to do a short soak primarily for sterilization, one hour with straight 3% hydrogen peroxide is fine. For a longer soak that will also boost germination, I cut the hydrogen peroxide 1:1 with purified water for a 6 hour soak or even as dilute as 1:10 for a 12 hour soak. I've never burned my seeds with hydrogen peroxide, but I don't want to risk it. It's normal for the seeds to float or sink. When you are ready to collect the seeds from the hydrogen peroxide you can pour the mix through a filter such as a coffee filter or paper towel placed over a cup, then let the filter/paper towel dry. While they are drying you can move on to complete Step 2. Once dry you should be able to easily brush them off of the filter onto a folded sheet of paper, a paper plate, or into an envelope, whatever method you prefer.
cultivation/germination/sowing.1782622572.txt.gz · Last modified: by vaugith